Call Forwarding - Comdial DXP Attendant Manual

Advanced Call Handling

Call Forwarding

You can forward the calls that normally ring at your telephone to another
telephone for answering. Call forwarding provides several options that can be
programmed by you locally at your station. For example, you can forward just
the prime line and intercom calls or forward every call that rings at your station.
Also, you can control whether the calls forward immediately or after a prepro-
grammed number of rings (this is true of busy calls as well, which ring in a
subdued manner) that is set by the installer. When the telephone is set to ring
several times before forwarding, you have a chance to end the current call before
the incoming call is forwarded.
For each internal call received while call forward is enabled, your telephone
sounds a ring reminder (short tone burst) to remind you that your calls are being
forwarded.
To forward your calls,
•
1. SELECT OPTIONS .
2. SELECT NEXT until the CFWD option appears.
3. SELECT CFWD .
4. SELECT SET .
5. Choose one of the following call forwarding
options,
• SELECT PERS to forward prime line and
• SELECT ALL to forward all calls.
• SELECT NEXT AND No ANS to forward
6. DIAL extension number of telephone to receive
your forwarded calls.
7. PRESS SPEAKER to end. Display shows FWD .
42
intercom calls.
calls that ring at your station but receive no
answer after a preprogrammed number of
rings (THEN PRESS PERS to forward your
prime line and intercom calls, OR PRESS
ALL to forward all calls that ring with no
answer at your telephone).
GCA70-250
Call Forwarding
SET CLR EXIT
Selecting Call Forwarding
Call Forwarding
PERS ALL NEXT
Call Forwarding Options
24 12:35
MON
FWD to J Doe Ext 321
Call Forwarding Active
Attendant Manual