Comdial DXP Attendant Manual page 14

Getting Started
Setting Volume Levels
The volume control on your telephone is a multi-
purpose control you can use to set the volume
(loudness) of the ringer, the speaker, and the
handset.
To set the ringer loudness level,
•
1. While your telephone is on-hook and
idle, PRESS the VOLUME UP OR
VOLUME DOWN button once for each
change in loudness you desire. The
ringer sounds once for each change as
an example of the current setting.
If you set the ringer to the OFF position, your telephone sounds a
NOTE:
short ring burst once for each call you receive at your station.
To set the speaker and handset
•
loudness levels,
1. PRESS INTERCOM button.
2. PRESS the VOLUME UP OR VOLUME
DOWN button once for each change in
speaker volume that you desire.
3. LIFT handset.
4. PRESS the VOLUME UP OR VOLUME
DOWN button once for each change in
handset volume that you desire.
NOTE: When a call ends, the system resets the speaker and handset volume
of all future calls to the programmed (default) setting. For instructions in
setting your speakerphone's default volume, see Default Volume Control
section in the system specific Advanced Features chapter.
4
GCA70-250
SCS Volume Buttons
Volume Buttons
Attendant Manual