Do Not Disturb Condition - Comdial DXP Attendant Manual

Answering Calls

Do Not Disturb Condition

You can set your telephone to a do not disturb mode using the designated interac-
tive or programmable button. The associated indicator turns on as an indication
of active DND and an appropriate message appears in the display of LCD
speakerphones. Under the DND condition, an outside call forwards to another
station according to the call forwarding feature. An intercom number call does
not ring at a DND station and the system sends a fast busy signal to the caller to
distinguish the DND condition from a standard busy line. No paging announce-
ments are received on the DND station. Even though your station is in the DND
mode, you can still make outgoing calls and access other features.
To enable DND, proceed as follows:
•
1. SELECT OPTIONS .
2. SELECT NEXT until the DND option appears.
3. SELECT DND .
4. SELECT ON .
5. SELECT EXIT .
6. PRESS SPEAKER to end.
To disable the DND condition,
•
1. REPEAT the above procedure, BUT SELECT
OFF instead of ON at step 4.
To set a Do Not Disturb condition at your
•
telephone when a call rings at your
station,
1. HEAR ringing and notice incoming call infor-
mation in display.
2. SELECT DND . Ringing will stop, caller will
hear the do not disturb tone, and your telephone
will remain in DND until you disable the feature
(described above).
24
GCA70-250
Do Not Disturb
ON OFF< EXIT
Setting Do Not Disturb
24 12:35
MON
Do Not Disturb
Station With DND Set
J Doe Ext 321
DND ANS
Blocking Calls With DND
Attendant Manual