Your Speakerphone's Buttons - Comdial DXP Attendant Manual

Getting Started

Your Speakerphone's Buttons

Hold Button (HOLD)
• Places a line or intercom call on hold.
• Stores pauses in number sequences during programming.
• Scrolls through LCD response messages.
• If multiple held calls feature is available, scans or scrolls through calls
placed on hold (when hold light is flashing).
Interactive Buttons (located below alphanumeric display)
• Provide quick and easy access to system features.
• Provide straightforward button programming without dialing codes (the
interactive buttons themselves, however, are not programmable).
Intercom Button (INTERCOM)
• Selects an intercom line.
• Allows you to initiate many of the telephone's features.
Mute Button (MUTE)
• Keeps the person on the line from hearing your conversation.
Direct Station Select/Busy Lamp Field Buttons (DSS/BLF)
• Allow you to store numbers for automatic dialing functions.
• Allow you to store telephone extension numbers for Direct Station Selec-
tion (DSS).
• May be programmed as a feature button.
• May be designated a line button by your system installer.
Shift Button (SHIFT)
• Allows you to enter a second tier for storing and/or automatically dialing
speed dial numbers. (That is, you can store two speed dial numbers at
every programmable button location—one in the regular tier and one in
the second tier). You activate the shift function by pressing this button
and turning the shift light on before storing or automatically dialing a
speed dial number from the second tier.
Speaker Button (SPEAKER)
• Turns your speaker on or off.
• Disconnects a call when you are on a handsfree call.
• Ends or cancels programming.
8
GCA70-250
Attendant Manual