Basic Setup - Panasonic FP7 User Manual

5.1 Basic Setup

5.1 Basic Setup
The settings of the multi I/O unit are specified in the configuration menu of FPWIN GR7.
The input voltage mode, input time constant and output polarity can be switched by the setting
of the software. The default setting for the output is "Output OFF". Set this as appropriate.
1.
Select Options>Multi I/O Unit Setting in the menu bar.
2.
Select the type of Multi I/O Unit.
The basic setup screen of "Multi I/O Unit Setting" is displayed.
3.
Set each item of the basic setup.
5-2 WUME-FP7MXY-06