Finishing Cut Longitud - HEIDENHAIN 548431-05 User Manual

Teach-in | Turning cycles

Finishing cut longitud.

Select Roughing cycles lon/trans
Select Cut longitud.
Press the Finishing run soft key
The cycle finishes the contour area from Start point contour X1 to
End point contour Z2.
At the end of the cycle, the tool returns to the Start
point.
Cycle parameters:
X, Z: Start point
X1: Start point contour
Z2: End point contour
G47: Safety clearance
Further information:
T: Tool number – turret pocket number
G14: Tool change point
Further information:
ID: ID no.
S: Cutting speed or Constant speed
F: Feed per revolution
MT: M after T: M function that is executed after the tool call T
MFS: M at beginning: M function that is executed at the
beginning of the machining step
MFE: M at end: M function that is executed at the end of the
machining step
WP: No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW: Angle in the B axis (machine-dependent)
CW: Reverse the tool (machine-dependent)
HC: Shoe brake (machine-dependent)
DF: Miscellaneous function (machine-dependent)
Type of machining for technology database access:
Finishing
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
"Safety clearance G47", Page 180
"Tool change point G14", Page 180
5
207