Tool and technology database | Tool editor mode of operation
Holder editor
The graphic tool representation functions in Simulation submode
take account of the shape of the tool holder and the mounting
position on the tool carrier.
Further information:
"Tool control graphics", Page 565
"3-D simulation in Simulation submode",
Further information:
Page 554
In the to_hold.hld tool holder table, you can define the holder type
and the setting gauges of the tool holder.
Proceed as follows to edit the tool holder table in Tool editor
mode of operation:
Press the Other tables soft key
Press the Holder editor soft key
The tool holder table contains the following entries:
NR: Line number
HID: Holder name – Unique holder name (max. 16 characters)
MTS: Manual change system
0: Tool holder
1: Manual change tool
XLH: Setup dim. in X
YLH: Setup dim. in Y
ZLH: Setup dim. in Z
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
8
571