Technical Information - HEIDENHAIN 548431-05 User Manual

Tables and overviews | Technical information

10.3 Technical information

Specifications
Components
Operating system
Memory
Input resolution
Display step
Interpolation
Feed rate
Spindle
Axis feedback control
Error compensation
Data interfaces
Diagnostics
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
MC 7410T main computer with
CC 61xx controller unit
12.1-inch TFT color flat-panel display with soft keys
15.6-inch TFT color flat-panel display with
touchscreen
HEROS real-time operating system for machine
control
1.8 GB (on CFR compact flash memory card) for NC
programs
X axis: 0.5 µm, diameter: 1 µm
Z and Y axes: 1 µm
U, V and W axes: 1 µm
C axis: 0.001°
B axis: 0.0001°
Configurable for each axis
Linear axes: to 0.1 µm
C and B axes: up to 0.00001°
Straight line: In 2 principal axes, optional in 3
principal axes (max. ±100 m)
Circle: In 2 axes (radius max. 999 m), optional
additional linear interpolation in the third axis
C axis: Interpolation in the linear axes X and Z with
the C axis
mm/min or mm/rev
Constant surface speed
Max. feed rate (60 000/pole pairs × ball screw
pitch) at fPWM = 5000 Hz
max. 60 000 rpm (with 2 pole pairs)
Integrated digital drive control for synchronous and
asynchronous motors
Position loop resolution: Signal period of the
position encoder/1024
Position control clock pulse: 0.2 ms
Speed control clock pulse: 0.2 ms
Current control: 0.1 ms
Linear and nonlinear axis error, backlash, reversal
peaks during circular movements
Static friction
1000 BaseT Gigabit Ethernet interface
4x USB 3.0 on the rear, 1x USB 2.0 on the front
Fast and simple troubleshooting through integrated
diagnostic aids
10
687