HEIDENHAIN 548431-05 User Manual page 129

Machine mode of operation | Machine setup
Setting the transmission channel
If the wireless handwheel is started automatically, then the
control tries to select the transmission channel providing the best
transmission signal. If you want to set the transmission channel
manually, proceed as follows:
Select the Setup menu item
Select the Service menu item
Select the Set up wireless handwheel menu item
Click the Frequency spectrum tab
Click the Stop HW button
The control stops the connection to the wireless handwheel and
determines the current frequency spectrum for all 16 available
channels.
Note the number of the channel with the least amount of radio
traffic (smallest bar)
Click the Start handwheel button to reactivate the wireless
handwheel
Click the Properties tab
Click the Select channel button
The controls shows all available channel numbers
Click the number of the channel that the control has found to
have the least amount of radio traffic
To save the configuration and exit the configuration menu, press
the END button
Selecting the transmitter power
A reduction in transmission power decreases the range
of the wireless handwheel.
Select the Setup menu item
Select the Service menu item
Select the Set up wireless handwheel menu item
Click the Set power button
The control displays the three available power settings. Click
the desired setting.
To save the configuration and exit the configuration menu,
press the END button
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
4
129