Absolute Or Incremental Dimensions - HEIDENHAIN 548431-05 User Manual

6

Absolute or incremental dimensions

The setting of the Increment soft key determines which type of
coordinate is active. Incremental parameters will have the appendix
i (Xi, Zi, etc.).
Soft key switchover for incremental
Transitions between contour elements
A transition between two contour elements is called
when one contour element makes a smooth and continuous
transition to the next. There is no visible kink or corner at the
intersection. With geometrically complex contours, tangential
transitions are useful for reducing the input of dimensional data
to a minimum and eliminating the possibility of mathematically
contradictory entries.
To be able to calculate unresolved contour elements, the control
must know the type of transition that connects the contour
elements. The transition to the next contour element is determined
by soft key.
Error messages that occur during definition of the
ICP contour are often caused by
transitions.
Soft key for tangential transition
428
Activate the incremental dimension for the
current value
forgotten
Activates the tangential condition for the
transition in the end point of the contour
element
ICP programming | Programming ICP contours
tangential
tangential
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017