HEIDENHAIN 548431-05 User Manual page 281

Teach-in | Recessing cycles
Axial recess turning
Select Recessing cycle
Select Recess turning
Select Axial recess turning
The cycle machines the rectangle described by the Start point and
the End point contour.
Cycle parameters:
X, Z: Start point
X2, Z2: End point contour
P: Feed depth – Maximum infeed depth
O: Recessing feed (default: active feed rate)
B: Offset width (default: 0)
U: Unidir. turning (default: 0)
0: Bidirectional
1: Unidirectional
G47: Safety clearance
Further information:
T: Tool number – turret pocket number
G14: Tool change point
Further information:
ID: ID no.
S: Cutting speed or Constant speed
F: Feed per revolution
MT: M after T: M function that is executed after the tool call T
MFS: M at beginning: M function that is executed at the
beginning of the machining step
MFE: M at end: M function that is executed at the end of the
machining step
WP: No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW: Angle in the B axis (machine-dependent)
CW: Reverse the tool (machine-dependent)
HC: Shoe brake (machine-dependent)
DF: Miscellaneous function (machine-dependent)
Type of machining for technology database access:
Recess turning
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
"Safety clearance G47", Page 180
"Tool change point G14", Page 180
5
281