HEIDENHAIN 548431-05 User Manual page 177

Teach-in | Working with cycles
Soft keys in cycle programming
Call the interactive contour input
Move to the tool change position
Activate spindle positioning (M19)
On:
Off:
Switch to the finishing operation
Switch to the expanded mode
Open the turret list and tool list. You can
load the tool from the list.
Load the actual positions X and Z in Teach-
in submode
Accept the proposed values for feed rate
and cutting velocity from the database
On:
Off:
Linear drilling and milling patterns on face or
lateral surface
Circular drilling and milling patterns on face
or lateral surface
Apply entered or changed values
Cancel the current dialog
If you have confirmed the cycle with the Input finished soft key, a
further soft-key row is displayed.
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Tool returns to starting point
Tool remains at cycle end position
Constant speed (rpm)
Constant surface speed (m/min)
5
177