Basic Elements Of Yz Plane - HEIDENHAIN 548431-05 User Manual

6

Basic elements of YZ plane

Starting point of contour in YZ plane
Enter the coordinates for the starting point and target point in the
first contour element of the contour. Entering the starting point is
only possible in the first contour element. In subsequent contour
elements, the starting point results from the previous contour
element in each case.
Defining the starting point:
Press the Contour menu item
Alternative: Press the Insert element soft key
Define the starting point
Parameters for defining the starting point:
YS, ZS: Starting point of contour
WS: Starting point of contour (polar angle)
PS: Starting point of contour (polar; radius)
ICP generates a G180 in smart.Turn mode of operation.
Vertical lines in YZ plane
Programming a vertical line:
Select the line direction
Enter the line dimensions
Define the transition to the next contour element
Parameters:
Y: Target point
Yi: Target point (incremental)
W: Target point (polar angle)
P: Target point (in polar coordinates)
L: Line length
F: Further information:
ICP generates a G181 in smart.Turn mode of operation.
512
"Machining attributes", Page 418
ICP programming | Contours in the YZ plane
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017