8
Countersink
Press the New tool soft key
Press the Special tool soft key
Press the special drilling tools soft key
Press the Countersinker soft key
The help graphics illustrate the dimensions of the tools.
Special parameters for countersinks:
DV: Hole diameter
DH: Stud diameter
BW: Drill angle
Further tool parameters:
Further information:
For drilling operations at
Hole diameter DV parameter is used to calculate the
spindle speed.
586
"General tool parameters", Page 576
constant cutting
Tool and technology database | Tool data
speed, the
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017