HEIDENHAIN 548431-05 User Manual page 408

5
Cycle run:
1 Positioning (machine-dependent):
Without C axis: Position to the Spindle angle C
With C axis: Activate the C axis and position to the Spindle
angle C at rapid traverse
In Machine mode: Machining from the current spindle angle
2 Calculate the pattern positions
3 Position the tool at the Start point of the pattern
4 Execute the milling operation
5 Position for the next machining operation
6 Repeat 4 to 5 until all machining operations have been
completed
7 Return to the Start point
8 Move to the Tool change point according to the setting in G14
408
Teach-in | Drilling and milling patterns
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017