Editing Contours For Cycles - HEIDENHAIN 548431-05 User Manual

6

Editing contours for cycles

Creating a new workpiece blank contour:
Select the ICP menu item
Select Workpiece blank or New auxiliary blank
in the ICP submenu
Select the Contour menu item
The ICP editor submode switches to entering
the complex workpiece blank contour
Alternative: Select the Bar menu item
Describe the standard workpiece blank Bar
Alternative: Select the Tube menu item
Describe the standard workpiece blank Tube
Creating a new contour for turning:
Select the ICP menu item
Select the contour type in the ICP submenu
Select the Contour editing menu item
Alternative: Press the Insert element soft key
ICP waits for you to enter a new contour
Loading a contour from the cycle editing:
Select the ICP menu item
Select the contour type in the ICP submenu
Press the Contour list soft key
ICP editor submode shows the list of the
contours created in cycle mode.
Select and load the contour
Editing an existing contour:
Select the ICP menu item
Select Contour editing in the ICP submenu
Alternative: Press the Change ICP contour soft
key
The ICP editor submode displays the selected
existing contour for subsequent editing
424
ICP programming | ICP editor submode in smart.Turn mode of operation
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017