Burr Cutters - HEIDENHAIN 548431-05 User Manual

8

Burr cutters

Press the New tool soft key
Press the Special tool soft key
Press the special milling tools soft key
Press the Thin millg. cutter soft key
The help graphics illustrate the dimensions of the tools.
Special parameters for burr cutters:
DV: Milling diameter
AZ: No. of teeth
SL: Cutting length
FW: Cutter angle
DD: Special corr.
Further tool parameters:
Further information:
For milling operations at
Cutter diameter DV is used to calculate the spindle
speed
For G193 Feed per tooth, the No. of teeth AZ
parameter is evaluated
592
"General tool parameters", Page 576
constant cutting
Tool and technology database | Tool data
speed,
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017