HEIDENHAIN 548431-05 User Manual page 661

Organization mode of operation | Transfer submode
Selecting the program
In the window on the left, the control shows a file list of the
control. The files of the remote station are displayed in the window
on the right when a connection is established. With the arrow keys
you can switch back and forth between the two windows.
When selecting a program, place the cursor on the desired
program and press the Mark soft key. You can also select all
programs with the Mark everything soft key.
Marked programs are highlighted in color. To unmark a program,
simply mark the program again.
The control displays the file size and the time of the last
modification of the program in the list if permitted by the length of
the file name.
With DIN programs/subprograms, you can also view the NC
program with the Program view soft key.
Press the Transmit or Receive soft key to start transferring the
files.
During transfer, the control displays the following information in a
transfer window:
The name of the program which is currently being transferred
If a file already exists in the target path, the control asks
whether you want to overwrite the file. You can then activate
overwriting for only that file or for all files in the transfer
If the control detects during transfer that the transferred files are
linked to other files (subprograms, ICP contours), a dialog opens
where you can select the linked files for transfer.
Soft keys for program selection
Soft key Meaning
Mark all files in the current window
Mark or unmark the file at the cursor
position and move the cursor down one
position
Open a DIN main program or subprogram
for reading
Transferring project files
If you wish to transfer files from a project, the Project soft key
enables you to open the project management of the control and
select the corresponding project.
Further information: "Project management", Page 167
The Internal project soft key enables you to manage
projects and transfer entire project folders.
Further information:
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
"Project management", Page 167
9
661