Rapid Positioning, Milling - HEIDENHAIN 548431-05 User Manual

5

Rapid positioning, milling

Select Milling
Select Rapid positioning
The cycle activates the C axis and positions the spindle (C axis) and
the tool.
Rapid traverse positioning is only possible in
Machine mode
The C axis is deactivated by a subsequent manual
milling cycle
Cycle parameters:
X2, Z2: Target point
C2: End angle—C-axis position (default: current spindle angle)
MT: M after T: M function that is executed after the tool call T
MFS: M at beginning: M function that is executed at the
beginning of the machining step
MFE: M at end: M function that is executed at the end of the
machining step
WP: No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
Cycle run:
1 Activate the C axis
2 Insert the current tool
3 Position the tool at rapid traverse to the Target point X2, Z2 and
the End angle C2
362
Teach-in | Milling cycles
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017