4
Cycle states
The control shows the current cycle status with the cycle symbol.
Cycle symbols
Axis feed rate
is the identification letter for feed data.
F
Depending on which mode of the Minute feed soft key is active,
data is entered in:
Millimeters per spindle revolution (feed per revolution)
Millimeters per minute (feed per minute)
On the screen, you can tell the type of feed rate from the unit of
measure in the input field.
You can change the feed value with the
(feed override) (range: 0 % to 150 %).
controller
106
Cycle ON
status
Cycle or program execution is active
Cycle OFF
status
Cycle or program execution is not active
feed compensation
Machine mode of operation | Machine data
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017