HEIDENHAIN 548431-05 User Manual page 452

6
Circular arc
Programming a circular arc:
Select the arc's direction of rotation
Enter the arc dimensions
Define the transition to the next contour element
Parameters:
X, Z: Target point
Xi, Zi: Target point (incremental)
W: Target point (polar angle)
Wi: Target point (polar angle, incremental; reference: starting
point)
P: Target point (polar; radius)
Pi: Target point – Distance between starting point and target
point (polar, incremental)
I, K: Center point of circular arc
Ii, Ki: Center point of circular arc (incremental) – Distance
between starting point and center in X and Z
PM: Center point of circular arc (polar; radius)
PMi: Center point of circular arc – Distance between starting
point and Center point (polar, incremental)
WM: Center point of circular arc (polar angle)
WMi: Center point of circular arc (polar angle, incremental;
reference: starting point)
R: Radius
ANs: Angle – Tangential angle in the starting point
ANe: Angle – Tangential angle in the target point
ANn: Angle to the subsequent element
ANp: Angle to the previous element
U, F, D, FP:
Further information:
ICP generates a G2 or G3 in smart.Turn mode of operation.
452
"Machining attributes", Page 418
ICP programming | Contour elements – turning contour
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017