HEIDENHAIN 548431-05 User Manual page 17

Fundamentals | Software and features
New functions of software 54843x-04
In the Simulation submode, the Dimensioning function was
introduced, see "Dimensioning", Page 550
In the Simulation submode, the Save contour function was
enhanced, see "Saving the contour", Page 549
In the Simulation submode, display of the B head is supported,
see "Depicting the tool holder in Simulation submode",
Page 539
In the Teach-in submode, the workpiece blank is also redrawn
with centric drilling, see "Contour follow-up in Teach-in
submode", Page 174
In the Teach-in submode, the GK parameter can now also be
negatively programmed with taper threads, see "Thread and
undercut cycles", Page 312
In the ICP editor submode, contour groups are supported.
The number of the contour group is displayed at top left in the
graphic window, see "Contour groups", Page 528
Machine parameter recessFinishing (602414) is now evaluated
in the Teach-in submode, so that the possibilities 1: Divide
floor element and 2: Move through and lift-off are also
available here, see "Recessing cycles", Page 253
New convertICP (602023) machine parameter for converting
ICP contours, see "List of machine parameters", Page 608
The machining parameters for approach and departure have
been adapted, see "List of machine parameters", Page 608
The Reamer tool type (type 43 from CNC PILOT 4290) is
supported, see "Tool types", Page 558
The navigation and the tool parameters view were improved in
the tool list, see "Navigating in the tool list", Page 561
The Pocket Type tool parameter was introduced, see "General
tool parameters", Page 576
Magazine pocket systems are supported, see "Editing the
magazine list", Page 115
Tool compensations can be entered with the handwheel or
in a dialog, see "Tool compensation", Page 136, see "Tool
compensation in Teach-in submode", Page 179
When configuring the C axis, you can set a defined value on the
current position, see "Setting C-axis values", Page 125
It is possible to sequentially run several main programs
automatically. A program list is generated for this purpose. With
each program, you can now specify how often it is run before
the next program is started, see "Automatic job", Page 150
The continuous run status is also kept if the control is restarted
in the Program run submode, see "Program run submode",
Page 142
Programs can be deleted in the file manager even though they
are selected in the Program run submode, after program block
display is deselected, see "Program run submode", Page 142
For systems with a C axis, the position display in the machine
data display (axis letter and index) can be configured by the
machine manufacturer
The functions G0, G1, and G701 have been enhanced with
parameters for auxiliary axes
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
17