HEIDENHAIN 548431-05 User Manual page 701

Tables and overviews | Syntax elements provided by the control
G commands for C-axis contours
Overlapping contours
Front and rear face contours
Lateral surface contours
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
G308-Geo Start of pocket/island
G309-Geo End of pocket/island
G100-Geo Starting point of face contour
G101-Geo Line segment on front face
G102-Geo Circular arc on front face
G103-Geo Circular arc on front face
G300-Geo Bore hole on front face
G301-Geo Linear slot on front face
G302-Geo Circular slot on front face
G303-Geo Circular slot on front face
G304-Geo Full circle on front face
G305-Geo Rectangle on front face
G307-Geo Eccentric polygon on front face
G401-Geo Linear pattern on front face
G402-Geo Circular pattern on front face
G110-Geo Starting point of lateral surface
contour
G111-Geo Line segment on lateral surface
G112-Geo Circular arc on lateral surface
G113-Geo Circular arc on lateral surface
G310-Geo Bore hole on lateral surface
G311-Geo Linear slot on lateral surface
G312-Geo Circular slot on lateral surface
G313-Geo Circular slot on lateral surface
G314-Geo Full circle on lateral surface
G315-Geo Rectangle on lateral surface
G317-Geo Eccentric polygon on lateral surface
G411-Geo Linear pattern on lateral surface
G412-Geo Circular pattern on lateral surface
10
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
701