HEIDENHAIN 548431-05 User Manual page 282

5
Teach-in | Recessing cycles
Cycle run:
1 Calculate the proportioning of cuts
2 Approach the workpiece from the Start point for the first pass
3 Execute the first cut (recessing)
4 Machine perpendicularly to the recessing direction (turning)
5 Repeat 3 to 4 until the End point contour X2, Z2 is reached
6 Return to the Start point on a paraxial path
7 Move to the Tool change point according to the setting in G14
282
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017