HEIDENHAIN 548431-05 User Manual page 384

5
G14: Tool change point
Further information:
ID: ID no.
S: Cutting speed or Constant speed
F: Feed per revolution
I: Contour-parallel oversize
K: Infeed-direction oversize
X2: Limit diameter
P: Feed depth (default: total depth of one infeed)
FZ: Approach feed (default: active feed rate)
E: Reduced feed for circular elements (default: active feed rate)
U: Overlap factor – defines the overlap of milling paths (default:
0.5) (range: 0 to 0.99)
Overlap = U * milling diameter
O: Roughing/Finish
0: Roughing
1: Finishing
H: Mill cutting direction
0: Up-cut
1: Climb
J: Mill direction
SCI: Safety clearance in the working plane
SCK: Safety clearance in infeed direction
Further information:
Page 180
MT: M after T: M function that is executed after the tool call T
MFS: M at beginning: M function that is executed at the
beginning of the machining step
MFE: M at end: M function that is executed at the end of the
machining step
WP: No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW: Angle in the B axis (machine-dependent)
CW: Reverse the tool (machine-dependent)
HC: Shoe brake (machine-dependent)
DF: Miscellaneous function (machine-dependent)
Type of machining for technology database access:
Milling
384
"Tool change point G14", Page 180
"Safety clearances SCI and SCK",
Teach-in | Milling cycles
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017