Centering Tool - HEIDENHAIN 548431-05 User Manual

8

Centering tool

Press the New tool soft key
Press the Special tool soft key
Press the special drilling tools soft key
Press the Center drill soft key
The help graphics illustrate the dimensions of the tools.
Special parameters for centering tools:
DV: Hole diameter
DH: Stud diameter
BW: Drill angle – Point angle of the drill
SW: Point angle
ZA: Stud length
Further tool parameters:
Further information:
For drilling operations at
Hole diameter DV parameter is used to calculate the
spindle speed.
584
"General tool parameters", Page 576
constant cutting
Tool and technology database | Tool data
speed, the
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017