Adapting The Limit Values - HEIDENHAIN 548431-05 User Manual

Machine mode of operation | Load monitoring (optional)

Adapting the limit values

After successful reference machining, the control uses the
reference values and the predefined factors specified in the
machine parameters to calculate the limit values.
You can adapt the calculated limit values as required for the
subsequent production.
Adapting the limit values:
Display the limit values: Select the Display menu
item
Select the Edit load data menu item
The control opens the Set load data form
Check the limit values
If required, adapt the parameters PG1, PG2 or
WGF
Be sure to adapt the correct limit values. First, press the
Next zone and Next axis soft keys to select the form
containing the limit values you want to change! As an
alternative, you can use the selection lists of the ZO
and AX parameters to select the correct form. Save the
changes separately for each axis by pressing the Save
soft key!
Reference machining does not have to be repeated after
adapting the limit values. You can continue production
with the adapted limit values.
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
4
161