HEIDENHAIN 548431-05 User Manual page 670

9
Importing NC programs from the connected data medium
Importing NC programs:
Select the Organization operating mode
Press the Transfer soft key (login required)
Open the menu with the
Miscellaneous functions soft key
Open the menu with the Import functions soft
key
Selection of cycle programs or ICP contours of
the MANUALplus 4110 (*.gtz)
Alternative: Selection of DIN programs of the
MANUALplus 4110 (*.nc/ *.ncs)
Alternative: Selection of programs of the CNC
PILOT 4290 (*.nc/ *.ncs)
Use the cursor keys to select the folder, then
press the ENT key to switch to the right window
With the cursor keys, select the NC program to
be converted
Alternative: Mark all NC programs
Start the import filter for converting the
program(s) to the format of your control
The names of imported cycle programs, ICP contour
descriptions, DIN programs and DIN subprograms are
given the prefix CONV_....
In addition, the control adapts the extension and imports
the NC programs to the correct folders.
670
Organization mode of operation | Transfer submode
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017