Tool Editor Mode Of Operation - HEIDENHAIN 548431-05 User Manual

Tool and technology database | Tool editor mode of operation
8.2

Tool editor mode of operation

Navigating in the tool list
In the tool list, the control displays important parameters and the
tool descriptions. You can recognize the tool type and the tool
orientation from the provided sketch of the tool tip.
You can navigate within the tool list with the arrow keys and
PgUp/PgDn to view the entries. Infrequently used tool parameters
are in the list further to the right, and can be displayed by
navigating in the columns.
For orientation purposes, the following columns are always
displayed:
ID number
Tool type
Tool orientation
Designation
Navigation keys
Switch to the next/previous line (tool) in the
tool list
Switch to the next/previous column in the
tool list
Jump one page up/down in the tool list
Navigation in the tool list is the same in all modes of
operation.
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
8
561