Dell PowerConnect J-EX4200-24T Software Manual page 3472

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 449: show snmp v3 Output Fields
Field Name Field Description
Access control Information about access control:
Engine Information about local engine configuration:
Information about engine ID:
Engine ID
Group name Name of the group to which this entry belongs.
Identifies the security model context for the security name.
Security model
Used with the security model; identifies a specific security name instance. Each security model/security
Security name
name combination can be assigned to a specific group.
Indicates whether a user is saved to the configuration file (nonvolatile) or not (volatile). Applies only
Storage type
to users with active status.
Status of the conceptual row. Only rows with active status are used by the SNMPv3 engine.
Status
show snmp v3 show snmp v3
3400
—Group name for which the configured access privileges apply. The group, together with the
Group
context prefix and the security model and security level, forms the index for this table.
—SNMPv3 context for which the configured access privileges apply.
Context prefix
—Security model and security level for which the configuration access privileges
Security model/level
apply.
—Identifies the MIB view applied to SNMPv3 read operations.
Read view
Write view —Identifies the MIB view applied to SNMPv3 write operations.
—Identifies the MIB view applied to outbound SNMP notifications.
Notify view
—Identifier that uniquely and unambiguously identifies the local SNMPv3 engine.
Local engine ID
—Number of times the local SNMPv3 engine has rebooted or reinitialized since the
Engine boots
engine ID was last changed.
—Number of seconds since the local SNMPv3 engine was last rebooted or reinitialized.
Engine time
Max msg size —Maximum message size the sender can accommodate.
—Identifier that uniquely and unambiguously identifies the local SNMPv3 engine.
Local engine ID
Engine boots —Number of times the local SNMPv3 engine has rebooted or reinitialized since the
engine ID was last changed.
Engine time —Number of seconds since the local SNMPv3 engine was last rebooted or reinitialized.
—Maximum message size the sender can accommodate.
Max msg size
—SNMPv3 engine ID associated with each user.
Engine ID
User —SNMPv3 user.
—Authentication and encryption algorithm available for use by each user.
Auth/Priv
—Indicates whether a user is saved to the configuration file (nonvolatile) or not (volatile).
Storage
Applies only to users with active status.
—Status of the conceptual row. Only rows with an active status are used by the SNMPv3
Status
engine.
user@host> show snmp v3