Dell PowerConnect J-EX4200-24T Software Manual page 3096

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 399: PoE Edit Settings (continued)
Field Description
Maximum Power Specifies the maximum PoE wattage available to
provision active PoE ports on the switch.
Table 400: System Settings
Field Description
PoE Management Specifies the power management mode. The options are:
static
NOTE: When the power management mode is set to
the maximum power value is overridden by the maximum
power value of the class of power device that is connected
to the switch on the PoE port.
Guard Band Specifies the band to control power availability on the
(watts) switch.
Related
Documentation
3024
and .
class
Configuring PoE (CLI Procedure) on page 3021
Example: Configuring PoE Interfaces on a J-EX Series Switch on page 3013
Example: Configuring PoE Interfaces with Different Priorities on a J-EX Series Switch
on page 3015
Monitoring PoE on page 3025
PoE and J-EX Series Switches Overview on page 3009
Your Action
Select a value in watts. If no value is specified,
the default is 15.4.
Your Action
By default the power management mode
is . Select
static class
management mode.
,
class
Enter a value to set the guard band value
in watts. The default value is 0.
to change the power