Dell PowerConnect J-EX4200-24T Software Manual page 3201

exp
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
exp classifier-name {
import (classifier-name | default);
forwarding-class class-name {
loss-priority level {
code-points [ aliases ] [ 3–bit-patterns ];
}
}
}
[edit class-of-service classifiers]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Define the experimental bits (EXP) code point mapping that is applied to the MPLS
packets.
J-EX Series switches support only one EXP code mapping on the switch (either default
or custom). It is applied globally and implicitly to all the MPLS-enabled interfaces on the
switch. You cannot bind it to an individual interface and you cannot disable it.
—Name of the classifier.
classifier-name
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Understanding Using CoS with MPLS Networks on J-EX Series Switches on page 2880
Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI
Procedure) on page 3111
Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure) on
page 3107
Configuring CoS on Provider Switches of an MPLS Network (CLI Procedure) on page 3106
Chapter 124: Configuration Statements for MPLS
3129