Dell PowerConnect J-EX4200-24T Software Manual page 3295

Table 431: show rsvp session Output Fields (continued)
Field Name Field Description
To Destination (egress routing device) of the session.
From Source (ingress routing device) of the session.
State of the path:
State
being taken down gracefully.
Destination (egress routing device) of the LSP.
Address
Source (ingress routing device) of the session.
From
State of the LSP that is being handled by this RSVP session. It can be either
LSPstate
Dn (down), or
gracefully.
Number of active routes (prefixes) that have been installed in the routing table.
Rt
For ingress RSVP sessions, the routing table is the primary IPv4 table (
For transit and egress RSVP sessions, the routing table is the primary MPLS table
mpls.0
Active Route Number of active routes (prefixes) that have been installed in the forwarding
table. For ingress RSVP sessions, the forwarding table is the primary IPv4 table
(
inet.0
MPLS table (
LSPname Name of the LSP.
Indicates whether the RSVP session is for the primary or secondary LSP path.
LSPpath
LSPpath
egress, and transit routing devices.
LSP deletion has been triggered.
(Egress routing device) Destination address for the bypass LSP.
Bypass
(When LSP is bidirectional) LSP will allow data to travel in both directions
Bidir
between GMPLS devices.
(When LSP is bidirectional) LSP will allow data to travel both ways between
Bidirectional
GMPLS devices.
(When LSP is bidirectional) Incoming label for reverse direction traffic for
Upstream label in
this LSP.
Upstream label out (When LSP is bidirectional) Outgoing label for reverse direction traffic for
this LSP.
Recovery label (When LSP is bidirectional) Label the upstream node suggests for use in the
Resv message that is sent.
received
, , or
Up Down AdminDn
AdminDn . AdminDn indicates that the LSP is being taken down
).
). For transit and egress RSVP sessions, the forwarding table is the primary
mpls.0 ).
can be either primary or secondary
LSPpath
Chapter 125: Operational Mode Commands for MPLS
. indicates that the LSP is
AdminDn
and can be displayed on the ingress,
can also indicate when a graceful
Level of Output
All levels
All levels
All levels
detail
detail
,
Up brief detail
brief
).
inet.0
detail
brief detail
detail
detail
detail
detail
detail
detail
detail
3223