Dell PowerConnect J-EX4200-24T Software Manual page 3571

Table 457: show oam ethernet connectivity-fault-management interfaces Output
Fields (continued)
Field Name Field Description
Maintenance domain name.
Maintenance
domain name
Format Maintenance domain name format configured.
(Maintenance
domain)
Level Maintenance domain level configured.
Maintenance association name.
Maintenance
association name
Maintenance association name format configured.
Format
(Maintenance
association)
Continuity-check Continuity-check status.
status
Continuity-check message interval.
Interval
Lost continuity-check message threshold.
Loss-threshold
Maintenance association end point (MEP) identifier.
MEP identifier
Neighbours Number of MEP neighbors.
Direction MEP direction configured.
MAC address configured for the MEP.
MAC address
Indicates the status of the Connectivity Fault Management (CFM) protocol
MEP status
running on the MEP:
Whether the remote MEP is not receiving connectivity check messages (CCMs).
Remote MEP not
receiving CCM
Erroneous CCM Whether erroneous CCMs have been received.
received
Whether cross-connect CCMs have been received.
Cross-connect CCM
received
RDI sent by some Whether the remote defect indication (RDI) bit is set in messages that have
been received. The absence of the RDI bit in a CCM indicates that the
MEP
transmitting MEP is receiving CCMs from all configured MEPs.
CCMs sent Number of CCMs transmitted.
Running , inactive , disabled , or
Chapter 131: Ethernet OAM Connectivity Fault Management
unsupported .
Level of Output
detail extensive
detail extensive
All levels
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
All levels
All levels
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
3499