Dell PowerConnect J-EX4200-24T Software Manual page 3224

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
ping mpls ldp fec count ping mpls ldp fec count
3152
If the LSP changes, the label and interface information displayed when you issued the
command continues to be used. You must configure MPLS at the
ping
hierarchy level on the remote router or switch to ping an LSP terminating there.
mpls]
You must configure MPLS even if you intend to ping only LDP forwarding equivalence
classes (FECs).
You can configure the ping interval for the
time in seconds using the
hierarchy level. For more information, see the Junos OS MPLS Applications Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
In asymmetric MTU scenarios, the echo response may be dropped. For example, if the
MTU from System A to System B is 1000 bytes, the MTU from System B to System A is
500 bytes, and the ping request packet size is 1000 bytes, the echo response is dropped
because the PAD TLV is included in the echo response, making it too large.
network
ping mpls ldp fec count on page 3152
When you enter this command, you are provided feedback on the status of your request.
An exclamation point ( ) indicates that an echo reply was received. A period (
!
that an echo reply was not received within the timeout period. An
echo reply was received with an error code. Packets with error codes are not counted in
the received packets count. They are accounted for separately.
user@host> ping mpls ldp 10.255.245.222 count 10
!!!xxx...x--- lsping statistics ---10 packets transmitted, 3 packets received,
70% packet loss 4 packets received with error status, not counted as received.
ping mpls ldp
statement at the
lsp-ping-interval
[edit protocols
command by specifying a new
[edit protocols ldp oam]
.
) indicates
.
indicates that an
x