Dell PowerConnect J-EX4200-24T Software Manual page 3262

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 425: show mpls lsp Output Fields
Field Name Field Description
Information about LSPs on the ingress routing device. Each session has one line
Ingress LSP
of output.
Information about the LSPs on the egress routing device. MPLS learns this
Egress LSP
information by querying RSVP, which holds all the transit and egress session
information. Each session has one line of output.
3190
logical-system (all | logical-system-name)
systems or on a particular logical system.
lsp-type —(Optional) Display information about a particular LSP type:
—Sessions for bypass LSPs.
bypass
egress —Sessions that terminate on this routing device.
ingress —Sessions that originate from this routing device.
—Sessions that pass through this routing device.
transit
name name —(Optional) Display information about the specified LSP or group of LSPs.
p2mp —(Optional) Display information about point-to-multipoint LSPs.
—(Optional) (Egress and transit routers only) Display accounting information
statistics
about LSPs. Statistics are not available for LSPs on the egress routing device, because
the penultimate routing device in the LSP sets the label to 0. Also, as the packet
arrives at the egress routing device, the hardware removes its MPLS header and the
packet reverts to being an IPv4 packet. Therefore, it is counted as an IPv4 packet,
not an MPLS packet.
—(Optional) Display LSPs transiting this routing device.
transit
view
clear mpls lsp on page 3140
show mpls lsp defaults on page 3195
show mpls lsp descriptions on page 3196
show mpls lsp detail on page 3196
show mpls lsp extensive on page 3196
show mpls lsp p2mp on page 3197
show mpls lsp p2mp detail on page 3197
Table 425 on page 3190 describes the output fields for the
fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show mpls lsp
command. Output
Level of Output
All levels
All levels