Dell PowerConnect J-EX4200-24T Software Manual page 3222

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
ping mpls l3vpn ping mpls l3vpn
ping mpls l3vpn detail
3150
sweep —(Optional) Automatically determine the size of the maximum transmission unit
(MTU).
You must configure MPLS at the
router or switch (the router or switch receiving the MPLS echo packets) to ping a Layer
2 circuit.
In asymmetric MTU scenarios, the echo response may be dropped. For example, if the
MTU from System A to System B is 1000 bytes, the MTU from System B to System A is
500 bytes, and the ping request packet size is 1000 bytes, the echo response is dropped
because the PAD TLV is included in the echo response, making it too large.
network
ping mpls l3vpn on page 3150
ping mpls l3vpn detail on page 3150
When you enter this command, you are provided feedback on the status of your request.
An exclamation point ( ) indicates that an echo reply was received. A period (
!
that an echo reply was not received within the timeout period. An
echo reply was received with an error code these packets are not counted in the received
packets count. They are accounted for separately.
user@host> ping mpls l3vpn vpn1 prefix 10.255.245.122/32
!!!!!
--- lsping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
user@host> ping mpls l3vpn vpn1 prefix 10.255.245.122/32 detail
Request for seq 1, to interface 68, labels <100128, 100112>
Reply for seq 1, return code: Egress-ok
Request for seq 2, to interface 68, labels <100128, 100112>
Reply for seq 2, return code: Egress-ok
Request for seq 3, to interface 68, labels <100128, 100112>
Reply for seq 3, return code: Egress-ok
Request for seq 4, to interface 68, labels <100128, 100112>
Reply for seq 4, return code: Egress-ok
Request for seq 5, to interface 68, labels <100128, 100112>
Reply for seq 5, return code: Egress-ok
--- lsping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
hierarchy level on the egress PE
[edit protocols mpls]
) indicates
.
indicates that an
x