Show Mpls Interface - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show mpls interface

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show mpls interface show mpls interface
3188
show mpls interface
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about MPLS-enabled interfaces. MPLS is enabled on an interface
when the interface is configured with both the
and
set interfaces interface-name unit 0 family mpls
view
Example: Configuring MPLS on J-EX Series Switches on page 3071
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3102
show mpls interface on page 3188
Table 424 on page 3188 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 424: show mpls interface Output Fields
Field Name
Interface
State
Administrative groups
user@switch> show mpls interface
Interface State
so-1/0/0.0 Up
set protocols mpls interface interface-name
commands.
Field Description
Name of the interface.
State of the interface: Up or Dn
Administratively assigned colors of the link.
Administrative groups
Blue Yellow Red
command.
show mpls interface
(down).