Dell PowerConnect J-EX4200-24T Software Manual page 3251

J series; j-ex series
Table of Contents

Advertisement

Table 418: show link-management te-link Output Fields (continued)
Field Name
Field Description
Switching
Type of switching that can be performed on the traffic-engineered link. Supported values are
and
Smallest single allocation of bandwidth, in bits per second (bps) or megabits per second (Mbps),
Minimum bandwidth
possible on the traffic-engineered link. This number is equal to the smallest bandwidth interface that
is a member of the traffic-engineered link.
Largest single allocation of bandwidth, in bps or Mbps, possible on the traffic-engineered link. This
Maximum bandwidth
number is equal to the largest bandwidth interface that is a member of the link.
Sum of the bandwidth, in bps or Mbps, of all interfaces that are members of the link (in bps).
Total bandwidth
Sum of the bandwidth, in bps or Mbps, of all interfaces that are members of the link and that are not
Available Bandwidth
yet allocated.
Name
Name of the interface.
State
State of the interface:
Identifier of the local side of the interface.
Local ID
Identifier of the remote side of the interface.
Remote ID
Bandwidth, in bps or Mbps, of the member interface.
Bandwidth
Whether the resource is allocated to an LSP:
Used
LSP name.
LSP-name
show
show
link-management
link-management
te-link
te-link
.
Packet
Up
or
Down
user@host> show link-management te-link
TE link name: FA-bd, State: Up
Local identifier: 4144, Remote identifier: 0, Local address: 2.2.2.1,
Remote address: 2.2.2.2, Encoding: Ethernet, Switching: Packet,
Minimum bandwidth: 0bps, Maximum bandwidth: 0bps, Total bandwidth: 0bps,
Available bandwidth: 0bps
Name
State Local ID
falsp-bd
Dn
TE link name: FA-be, State: Up
Local identifier: 4145, Remote identifier: 0, Local address: 1.1.1.1,
Remote address: 1.1.1.2, Encoding: Ethernet, Switching: Packet,
Minimum bandwidth: 0bps, Maximum bandwidth: 10Mbps, Total bandwidth: 10Mbps,
Available bandwidth: 8Mbps
Name
State Local ID
falsp-be
Up
Chapter 125: Operational Mode Commands for MPLS
.
or
.
Yes
No
Remote ID
Bandwidth Used
43077
0
Remote ID
Bandwidth Used
43076
0
PSC-1
LSP-name
0bps No
LSP-name
10Mbps
Yes
e2elsp-bf
3179

Advertisement

Table of Contents
loading

Table of Contents