Dell PowerConnect J-EX4200-24T Software Manual page 3485

Table 451: Performance Probe Tests Configuration Fields (continued)
Field
Egress Standard Deviation
Ingress Standard Deviation
Traps
Egress Jitter Exceeded
Egress Standard Deviation Exceeded
Egress Time Exceeded
Ingress Jitter Exceeded
Ingress Standard Deviation Exceeded
Ingress Time Exceeded
Jitter Exceeded
Function
Sets the maximum allowable standard
deviation of outbound times (in
microseconds), if exceeded, triggers a
probe failure and generates a system log
message.
Sets the maximum allowable standard
deviation of inbound times (in
microseconds), if exceeded, triggers a
probe failure and generates a system log
message.
Generates SNMP traps when the
threshold for jitter in outbound time is
exceeded.
Generates SNMP traps when the
threshold for standard deviation in
outbound times is exceeded.
Generates SNMP traps when the
threshold for maximum outbound time
is exceeded.
Generates SNMP traps when the
threshold for jitter in inbound time is
exceeded.
Generates SNMP traps when the
threshold for standard deviation in
inbound times is exceeded.
Generates SNMP traps when the
threshold for maximum inbound time is
exceeded.
Generates SNMP traps when the
threshold for jitter in round-trip time is
exceeded.
Chapter 129: Real-Time Performance Monitoring (RPM)
Your Action
Type a number from 0 through
60000000.
Type a number from 0 through
60000000.
To enable SNMP traps for this
condition, select the check box.
To disable SNMP traps, clear the check
box.
To enable SNMP traps for this
condition, select the check box.
To disable SNMP traps, clear the check
box.
To enable SNMP traps for this
condition, select the check box.
To disable SNMP traps, clear the check
box.
To enable SNMP traps for this
condition, select the check box.
To disable SNMP traps, clear the check
box.
To enable SNMP traps for this
condition, select the check box.
To disable SNMP traps, clear the check
box.
To enable SNMP traps for this
condition, select the check box.
To disable SNMP traps, clear the check
box.
To enable SNMP traps for this
condition, select the check box.
To disable SNMP traps, clear the check
box.
3413