Dell PowerConnect J-EX4200-24T Software Manual page 3495

Table 454: show services rpm probe-results Output Fields (continued)
Field Name Field Description
Results over last test Results for the most recently completed test. If the command is issued while the first test is in progress,
this information is not displayed
Displays statistics made for all the probes, independently of the grouping into tests, as well as statistics
Results over all tests
for the current test.
Probes sent —Number of probes sent for the most recently completed test.
—Number of probe responses received for the most recently completed test.
Probes received
—Percentage of lost probes for the most recently completed test.
Loss percentage
Test completed —Time the most recent test was completed.
—Measurement type. Possible values are round-trip time, positive round-trip jitter,
Measurement
negative round-trip jitter, egress time, positive egress jitter, negative egress jitter, ingress time,
positive ingress jitter, negative ingress jitter, and, for the probe type
delay and ingress delay.
For each measurement type, the following individual calculated results are provided:
—Number of probes.
Samples
—Minimum RTT, ingress delay, or egress delay measured for the most recently completed
Minimum
test.
—Maximum RTT, ingress delay, or egress delay measured for the most recently
Maximum
completed test.
Average —Average RTT, ingress delay, or egress delay measured for the most recently completed
test.
—Peak-to-peak difference, in microseconds.
Peak to peak
Stddev —Standard deviation, in microseconds.
—Statistical sum.
Sum
—Number of probes sent in all tests.
Probes sent
Probes received —Number of probe responses received in all tests.
—Percentage of lost probes in all tests.
Loss percentage
—Measurement type. Possible values are round-trip time, positive round-trip jitter,
Measurement
negative round-trip jitter, egress time, positive egress jitter, negative egress jitter, ingress time,
positive ingress jitter, negative ingress jitter, and, for the probe types
, the egress delay and ingress delay.
udp-ping-timestamp
For each measurement type, the following individual calculated results are provided:
Samples —Number of probes.
—Minimum RTT, ingress delay, or egress delay measured over the course of the current
Minimum
test.
Maximum —Maximum RTT, ingress delay, or egress delay measured over the course of the current
test.
—Average RTT, ingress delay, or egress delay measured over the course of the current
Average
test.
—Peak-to-peak difference, in microseconds.
Peak to peak
—Standard deviation, in microseconds.
Stddev
—Statistical sum.
Sum
Chapter 129: Real-Time Performance Monitoring (RPM)
icmp-ping-timestamp
icmp-ping-timestamp
, the egress
and
3423