Dell PowerConnect J-EX4200-24T Software Manual page 3580

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 459: show oam ethernet connectivity-fault-management mep-database Output
Fields (continued)
Field Name Field Description
Number of loopback messages (LBMs) sent.
LBMs sent
Number of loopback response messages (LBRs) received that were valid messages and in sequence.
Valid in-order LBRs
received
Valid out-of-order LBRs Number of LBRs received that were valid messages and not in sequence.
received
Number of LBRs received that were corrupted.
LBRs received with
corrupted data
Number of LBRs transmitted.
LBRs sent
Linktrace messages (LTMs) transmitted.
LTMs sent
Linktrace messages received.
LTMs received
Linktrace responses (LTRs) transmitted.
LTRs sent
LTRs received Linktrace responses received.
Sequence number of Sequence number of the next linktrace message request to be transmitted.
next LTM request
If the MEP is an initiator for a one-way ETH-DM session: Number of one-way delay measurement
1DMs sent
(1DM) PDU frames sent to the peer MEP in this session.
For all other cases, this field displays
If the MEP is a receiver for a one-way ETH-DM session: Number of valid 1DM frames received.
Valid 1DMs received
For all other cases, this field displays
Invalid 1DMs received If the MEP is a receiver for a one-way ETH-DM session: Number of invalid 1DM frames received.
For all other cases, this field displays
If the MEP is an initiator for a two-way ETH-DM session: Number of Delay Measurement Message
DMMs sent
(DMM) PDU frames sent to the peer MEP in this session.
For all other cases, this field displays
If the MEP is a responder for a ETH-DM session: Number of Delay Measurement Reply (DMR) frames
DMRs sent
sent.
For all other cases, this field displays
3508
.
0
0 .
.
0
.
0
.
0