Dell PowerConnect J-EX4200-24T Software Manual page 3234

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
Output Fields
3162
labels —(Optional) Display labels used for transmit and receive.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display information about the specified connection only.
name
—(Optional) Display information about the connection and interface status.
status
view
Table 412 on page 3162 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 412: show connections Output Fields
Field Name Field Description
Whether link monitoring is enabled:
CCC and TCC
connections [Link
Monitoring On I Off]
Connection or circuit status. See the output's legend for an explanation of the
Legend for Status
status field values.
(St)
Type of connection:
Legend for
connection types
if-sw
rmt-if
will display a state
lsp-sw
lsp-sw
Type of circuits:
Legend for circuit
types
intf
tlsp
rlsp
Name of the configured CCC connection.
Connection/Circuit
Type of connection.
Type
State of the connection.
St
Time that the connection or circuit last transitioned to the
Time last up
state.
Number of times that the connection or circuit has transitioned to the
# Up trans
(operational) state.
—(Optional) Perform this operation on all logical
—Layer 2 switching cross-connect.
—Remote interface switch. While graceful restart is in progress,
of
(St) Restart
—LSP stitching cross-connect. While graceful restart is in progress,
will display a state (St) of
—Interface circuit.
—Transmit LSP circuit.
—Receive LSP circuit.
command.
show connections
or .
On Off
.
Restart .
(operational)
Up
rmt-if
Up