Dell PowerConnect J-EX4200-24T Software Manual page 3088

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Overview and Topology
Table 397: Components of the PoE Configuration Topology
Property
Switch hardware
VLAN name
Connection to a wireless access point (requires PoE)
Security IP Cameras (require PoE)
Emergency VoIP phone (requires PoE)
VoIP phone in Executive Office (requires PoE)
Other VoIP phones (require PoE)
Direct connections to desktop PCs, file servers, integrated
printer/fax/copier machines (no PoE required)
Unused ports (for future expansion)
Configuration
CLI Quick
Configuration
3016
Performed the initial switch configuration. See "Connecting and Configuring a J-EX
Series Switch (CLI Procedure)" on page 161 or "Connecting and Configuring a J-EX Series
Switch (J-Web Procedure)" on page 163 for details.
The topology used in this example consists of a switch that has 24 ports. Eight of the
ports support PoE (IEEE 802.3af), which means they provide both network connectivity
and electric power for powered devices such as VoIP telephones, wireless access points,
and IP security cameras that require 12.95 W or less. The remaining 16 ports provide only
network connectivity. You use the standard ports to connect devices that have their own
power sources, such as desktop and laptop computers, printers, and servers. Table 397
on page 3016 details the topology used in this configuration example.
To configure PoE interfaces:
By default, PoE interfaces are created for all PoE ports and PoE is enabled. The default
priority for PoE interfaces is
To quickly set some interfaces to high priority and to include descriptions of the interfaces,
copy the following commands and paste them into the switch terminal window:
[edit]
set poe interface ge-0/0/1 priority high telemetries
set poe interface ge-0/0/2 priority high telemetries
set poe interface ge-0/0/3 priority high telemetries
set poe interface ge-0/0/4 priority high telemetries
Settings
Switch with 24 Gigabit Ethernet ports: 8 PoE interfaces
( through
ge-0/0/0 ge-0/0/7
( ge-0/0/8 through ge-0/0/23
default
ge-0/0/0
and
ge-0/0/1 ge-0/0/2 high
ge-0/0/3 high
ge-0/0/4 high
through
ge-0/0/5 ge-0/0/7
ge-0/0/8 through ge-0/0/20
ge-0/0/21 through ge-0/0/23
.
low
) and 16 non-PoE interfaces
)