Dell PowerConnect J-EX4200-24T Software Manual page 3296

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 431: show rsvp session Output Fields (continued)
Field Name Field Description
Recovery label sent (When LSP is bidirectional) Label the downstream node suggests for use in its
Resv messages that is returned.
(When LSP is bidirectional) Label the upstream node suggests for use in the
Suggested label
Resv message that is sent.
received
(When LSP is bidirectional) Label the downstream node suggests for use in its
Suggested label
Resv message that is returned.
sent
or RSVP reservation style. This field consists of two parts. The first is the number
Resv style Style
of active reservations. The second is the reservation style, which can be
filter),
Incoming label for this LSP.
Label in
Label out Outgoing label for this LSP.
Time left Number of seconds remaining in the lifetime of the reservation.
Date and time when the RSVP session was initiated.
Since
Sender's traffic specification, which describes the sender's traffic parameters.
Tspec
Indicates whether the LSP is a multiclass LSP (
DiffServ info
a Differentiated-Services-aware traffic engineering LSP (
bandwidth Bandwidth for each class type (
Protocol ID and sender/receiver port used in this RSVP session.
Port number
Fast reroute has been requested by the ingress routing device.
FastReroute
desired
Soft preemption Soft preemption has been requested by the ingress routing device.
desired
(Data [not a bypass or backup] LSP when the protection scheme has been
FastReroute
requested) Fast reroute (one-to-one backup) has been requested by the
desired
ingress routing device.
(Data [not a bypass or backup] LSP when the protection scheme has been
Link protection
requested) Link protection (many-to-one backup) has been requested by the
desired
ingress routing device.
(Data [not a bypass or backup] LSP when the protection scheme has been
Node/Link
protection desired requested) Node and link protection (many-to-one backup) has been requested
by the ingress routing device.
3224
(shared explicit), or (wildcard filter).
SE WF
ct0 ,
multiclass diffServ-TE LSP
diffServ-TE LSP
ct1 , ct2 , or ct3 ).
Level of Output
detail
detail
detail
brief detail
(fixed
FF
brief detail
brief detail
brief detail
detail
detail
) or
detail
).
detail
detail
detail
detail
detail extensive
detail extensive
detail extensive