Dell PowerConnect J-EX4200-24T Software Manual page 3323

Mirroring All Employee Traffic for Local Analysis
To configure port mirroring for all employee traffic for local analysis, perform these tasks:
CLI Quick To quickly configure local port mirroring for ingress traffic to the two ports connected to
Configuration employee computers, copy the following commands and paste them into the switch
terminal window:
[edit]
set interfaces ge-0/0/0 unit 0 family ethernet-switching
set interfaces ge-0/0/1 unit 0 family inet 192.1.1.1/24
set interfaces ge-0/0/10 unit 0 family ethernet-switching
set ethernet-switching options analyzer employee–monitor input ingress interface ge-0/0/0.0
set ethernet-switching options analyzer employee–monitor input ingress interface ge-0/0/1.0
set ethernet-switching options analyzer employee–monitor output interface ge-0/0/10.0
Step-by-Step To configure an analyzer called
Procedure and the analyzer output interface:
Configure each interface connected to employee computers as an input interface
1.
for the port-mirror analyzer that we are calling
Configure the output analyzer interface for the
2.
be the destination interface for the mirrored packets:
Results Check the results of the configuration:
[edit]
user@switch# show
ethernet-switching-options {
analyzer employee-monitor {
input {
ingress {
}
}
output {
interface {
}
}
}
}
Mirroring Employee-to-Web Traffic for Local Analysis
To configure port mirroring for employee to web traffic, perform these tasks:
employee-monitor
[edit ethernet-switching-options]
user@switch# set analyzer employee-monitor input ingress interface ge–0/0/0.0
user@switch# set analyzer employee-monitor input ingress interface ge–0/0/1.0
[edit ethernet-switching-options]
user@switch# set analyzer employee-monitor output interface ge-0/0/10.0
interface ge-0/0/0.0;
interface ge-0/0/1.0;
ge-0/0/10.0;
Chapter 126: Port Mirroring
and specify the input (source) interfaces
:
employee-monitor
analyzer. This will
employee-monitor
3251