Dell PowerConnect J-EX4200-24T Software Manual page 3615

show snmp mib get show snmp mib get
user@host> show snmp mib get sysObjectID.0
sysObjectID.0 = jnxProductNameM20
show snmp mib get
user@host> show snmp mib get ?sysObjectID.0 sysUpTime.0?
sysObjectID.0 = jnxProductNameM20
(Multiple Objects)
sysUpTime.0 = 1640992
show snmp mib
user@host> show snmp mib get-next jnxMibs
jnxBoxClass.0 = jnxProductLineM20.0
get-next
show snmp mib
user@host> show snmp mib get-next 1.3.6.1
sysDescr.0
get-next (Specify an
JUNOS release: 2004-1 Build date: build date UTC Copyright (c) 1996-2004 Juniper
OID)
show snmp mib walk
user@host> show snmp mib walk system
sysDescr.0
JUNOS release #0: 2004-1 Build date: build date UTC Copyright (c) 1996-2004 Juniper
sysObjectID.0 = jnxProductNameM20
sysUpTime.0 = 1640992
sysContact.0 = Your contact
sysName.0 = my router
sysLocation.0 = building 1
sysServices.0 = 4
show snmp mib walk
user@host show snmp mib walk decimal jnxUtilData
jnxUtilCounter32Value.102.114.101.100 = 100
decimal
show snmp mib walk
show snmp mib walk ascii jnxUtilData
jnxUtilCounter32Value."fred" = 100
(ASCII)
show snmp mib walk
show snmp mib walk ascii jnxFWCounterByteCount
jnxFWCounterByteCount."fe-1/3/0.0-i"."CLASS_BE-fe-1/3/0.0-i".2 = 0
(Multiple Indices)
jnxFWCounterByteCount."fe-1/3/0.0-i"."CLASS_CC-fe-1/3/0.0-i".2 = 0
jnxFWCounterByteCount."fe-1/3/0.0-i"."CLASS_RT-fe-1/3/0.0-i".2 = 0
.......
show snmp mib walk
show snmp mib walk ascii jnxFWCounterByteCount
jnxFWCounterByteCount."fe-1/3/0.0-i"."CLASS_BE-fe-1/3/0.0-i".2 = 0
decimal (Multiple
jnxFWCounterByteCount."fe-1/3/0.0-i"."CLASS_CC-fe-1/3/0.0-i".2 = 0
Indices)
jnxFWCounterByteCount."fe-1/3/0.0-i"."CLASS_RT-fe-1/3/0.0-i".2 = 0
.......
Chapter 134: Operational Mode Commands for General Network Management and Monitoring
= Juniper Networks, Inc. m20 internet router, kernel
Networks, Inc.
= Juniper Networks, Inc. m20 internet router, kernel
Networks, Inc.
3543