Dell PowerConnect J-EX4200-24T Software Manual page 3246

J series; j-ex series
Table of Contents

Advertisement

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 416: show link-management routing Output Fields (continued)
Field Name
Field Description
State
State of the control channel.
TE link name
Traffic-engineered link name.
State of the traffic-engineered link:
State
Identifier of the local side of the link.
Local identifier
Identifier of the remote side of the link.
Remote identifier
Address of the local side of the link.
Local address
Address of the remote side of the link.
Remote address
Encoding
Physical layer media type determined by the interfaces contained in the traffic-engineered link. Typical
values include
Smallest single allocation of bandwidth, in bits per second (bps) or megabits per second (Mbps),
Minimum bandwidth
possible on the traffic-engineered link. This number is equal to the smallest bandwidth interface that
is a member of the traffic-engineered link.
Largest single allocation of bandwidth, in bps or Mbps, possible on the traffic-engineered link. This
Maximum bandwidth
number is equal to the largest bandwidth interface that is a member of the link (in bps).
Total bandwidth
Sum of the bandwidth, in bps or Mbps, of all interfaces that are members of the link.
Available bandwidth
Sum of the bandwidth, in bps or Mbps, of all interfaces that are members of the link and that are not
yet allocated.
Resource
Forwarding adjacency LSP information.
Type of resource. The type is always a forwarding adjacency LSP.
Type
State of the LSP:
State
Internal identifier for the peer. The range of values is
System Identifier
Bandwidth resource, in bps or Mbps, on the TE-link learned from the routing process.
Total bandwidth
Traffic parameters
3174
,
SDH/SONET
Ethernet
or
.
Up
Down
—Physical layer media type determined by the interfaces contained in the traffic-engineered
Encoding
link. Typical values include
SDH/SONET
—Type of switching that can be performed on the traffic-engineered link:
Switching
Packet
.
—Layer 2 data for switching Layer 2 LSPs for this resource. Not supported. This value is
Granularity
always
unknown
.
or
.
Up
Down
, and
.
Packet
through
0
64,000
,
, and
.
Ethernet
Packet
.
and
PSC-1

Advertisement

Table of Contents
loading

Table of Contents