Dell PowerConnect J-EX4200-24T Software Manual page 3175

Configure
6.
Related Example: Configuring MPLS on J-EX Series Switches on page 3071
Documentation
Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI
Procedure) on page 3111
Configuring MPLS on Provider Edge Switches Using MPLS Over IP (CLI Procedure) on
page 3107
Configuring an OSPF Network (J-Web Procedure) on page 1435
Understanding Junos OS MPLS Components for J-EX Series Switches on page 3059
[edit]
user@switch# set interfaces lo0 unit 0 family inet address 127.1.1.1/32
user@switch# set interfaces ge-0/0/5 unit 0 family inet address 10.1.5.1/24
user@switch# set interfaces ge-0/0/6 unit 0 family inet address 10.1.6.1/24
user@switch# set interfaces ae0 unit 0 family inet address 10.1.9.2/24
family mpls on the logical units of the core interfaces:
[edit]
user@switch# set interfaces ge-0/0/5 unit 0 family mpls
user@switch# set interfaces ge-0/0/6 unit 0 family mpls
user@switch# set interfaces ae0 unit 0 family mpls
NOTE: You can enable
aggregated Ethernet interfaces. You cannot enable it on tagged VLAN
interfaces.
Chapter 122: Configuring MPLS
on either individual interfaces or
family mpls
3103