Dell PowerConnect J-EX4200-24T Software Manual page 3279

Table 428: show rsvp interface Output Fields (continued)
Field Name Field Description
State State of the interface.
Disabled
Down
Enabled
Up
Interface does not support RSVP authentication.
NoAuthentication
NoAggregate Interface does not support refresh reduction.
NoReliable Interface does not support refresh reduction message ID extension.
Interface does not support link protection.
NoLinkProtection
Frequency at which RSVP hellos are sent on this interface (in seconds).
HelloInterval
IP address of the local interface.
Address
Next-hop link address to transmit messages.
Active control
channel
Traffic-engineered links that are managed by the peer they are associated with.
TElink
Number of reservations that are actively reserving bandwidth on the interface.
Active resv
Number of times an RSVP session was preempted on this interface.
PreemptionCnt
Percentage change in reserved bandwidth to trigger an IGP update.
Update threshold
User-configured subscription factor.
Subscription
bc number Bandwidth allocated for the specified bandwidth constraint.
ct number Bandwidth allocated for the specified class type.
Static BW Total interface bandwidth, in bps.
Amount of bandwidth that RSVP is allowed to reserve, in bps. It is equal to
Available BW
(static bandwidth * subscription factor).
Currently reserved bandwidth, in bps.
Reserved BW
Number of times a soft preemption occurred on this interface. This number is
SoftPreemptionCnt
not included in the
Currently overbooked bandwidth, in bps, by class type (
Overbooked BW
—No traffic engineering information is displayed.
—Interface is not operational.
—Displays traffic engineering information.
—Interface is operational.
PreemptionCnt
Chapter 125: Operational Mode Commands for MPLS
value.
through
ct0
Level of Output
All levels
detail
detail
detail
detail
detail
detail
None specified
None specified
All levels
detail
detail
All levels
extensive
extensive
All levels
al levels
All levels
detail
).
ct3 detail
3207